The design of fiber laser marking machine is to bring higher production efficiency to enterprises and create higher value, so how to improve the marking speed of fiber laser marking machine?

1. The main factors affecting the fiber laser marking machine are divided into two aspects: internal factors andworkpieces.

　The internal factors are mainly laser frequency, laser spot mode and beam divergence angle, laser power, reasonable optical shaping and auxiliary gas material during processing.As for the internal factors , when choosing the model in the early stage, and you should follow the advice of the laser engineer to purchase. Another factor customer should notice during processing is the marking density, marking format, marking depth and laser spot size.

2. Marking density

Under the same situiation of same format, the same spot, and the same depth, the higher the marking density, the slower the corresponding marking speed. The reason is that the density directly increases the marking area.

3. Marking format

Because the deflection area of the large-format marking galvanometer is enlarged, the marking speed of large-format is slower than that of small-format.

4. Marking depth

According to demand, if the depth of marking needs to be deepened, the parameters of the fiber laser marking machine need to be adjusted, and the power and current of the fiber laser marking machine should be increased. Therefore, the marking speed will be affected in these processes.

5. Laser spot size

The smaller the light spot, the smaller the marking volume. Therefore, the larger the light spot, the faster the marking speed.